The VOOPOO DRAG TC Kit consists of a DRAG MOD and an UFORCE tank! Powered by dual 18650 batteries, it fires a maximum output of 157W. The GENE.Fan chip brings a fast firing speed of 0.025s. The Super Mode allows you to get bigger clouds and better taste between 130-157W with atomizers of 0.1-0.3ohm. The innovative Power Compensation Mode provides a stable power output too. The UFORCE is an innovative subohm tank focused on optimal flavor with 3.5ml/5ml capacity and 24.6mm diameter. Its upgraded venting system and triple balanced inhale system help you to be protected from mouth heating when you vape and awake the force. Get this device now!
VOOPOO DRAG MOD
Size: 90 x 54 x 24mm
Battery: 2 x 18650 batteries (NOT included)
Working Voltage: 6.4-8.5V
Output Voltage Range:0-7.5V
Resistance range: 0.05-3.0 (VW); 0.05-1.5 (TC)
Output Power: 5-157W
Innovative Mode: Super Mode/Power Compensation Mode
TC Mode: SS316/Ni200/Ti/NC/TCR/CCR
Thread: 510 thread
Size: 24.6mm x 54.05mm
Capacity: 1.8ml(TPD Edition)/ 5ml(Standard Edition)
Coil: U4 0.23ohm Quadruple Coil (50-120W,Best 60-80W)/U2 0.4ohm Dual Coil (40-80W,Best 55-65W)
Thread: 510 thread
Selective 1.8ml standard tube and 5ml bulb tube
Precise OCC coil head to bring fabulous taste
Quick vent channel to produce huge vape without mouth burning
Environmental insulation materials drip tip with V-shaped structure
Convenient sliding type top filling design
Max 157W output power
Fast fire speed with Gene.Fan chip
Pioneer Super Mode
Innovative Power Compensation Mode
Support balance charging
It comes with
1x UFORCE Tank(5ml)
1x UFORCE U4(pre-installed)
1x UFORCE U2
1x Spare Glass Tube(3.5ml)
6x Sealing O-Ring
1x VOOPOO DRAG MOD (without cell)
1x USB Cable
1x User Manual
1x Warranty Card
1x GENE Chip Card
How to Use:
Power on/off: Press the fire button 5 times in quick succession to turn the device on and off.
Mode Switch: Press the fire button 3 times quickly, the four interfaces can be switched orderly under normal startup condition. Constant power and temperature control SS/Ni/Ti.
Temperature Adjustment: When the temperature was set to 100℃, keep on pressing the down button, temperature will turn to 600F. When the temperature was set to 200F, keep on pressing the down button, temperature will turn to 315℃. Quickly press the fire button 4 times can get into wattage adjust interface. Then you will see the letter "W" is flashing. The adjustable wattage is 5W to 80W.
Function Menu: Press uo and down buttons simultaneously for 1.5 seconds, enter the function menu interface. Press up button or down button simultaneously to choose th function. Press the fire button to make confirmation and go to next step.
Customization Mode: Press up and down buttons simultaneously for 1.5 seconds, the device will go to the function menu interface. Press up and down button to choose the Customization Mode and press fire button to go into Customization Mode interface. Under Customization Mode, press fire button 3 times continuously, 4 kinds of Customization Mode can be switched sequentially: Stable Power Mode, Temperature Control Mode:TC-SS316/TC-Ni200/TC-Ti.
Sleep Mode: If there is no operation for 30 seconds, screen will turn off. No operation for 30 minutes after the screen off, the device will enter sleep mode.