Joyetech eGo ONE Atomizer Head 5 pcs
Joyetech eGo ONE Atomizer Head 5 Pcs
The Joyetech eGo ONE Atomizer Head is introduced with unique design and functionally working with Joyetech eGo ONE atomizer.
Resistance Value: 0.5ohm & 1.0ohm
Working Wattage(0.5ohm): 20-35W
Working Wattage(1.0ohm): 10-20W
This product comes with
5 X Joyetech eGo ONE Atomizer Head
0.5ohm & 1.0ohm resistance
How to replace
1. Unscrew the atomizer base from the atomizer tube.
2. Simply twist the atomizer head clockwise and pull it out.
3. Insert a new one and twist it counter-clockwise to lock it into the slot.
It’s only suitable for All Joyetech eGo One atomizers.
Joyetech eGo One CT Starter Kit - 1100mAh
Joyetech eGo One CT Starter Kit - 1100mAh, applies Joyetech constant temperature technology. Three modes: CT-Ti (Titanium)/CT-Ni (Nickel)/CW mode are available. With five colors, and various atomizer heads, you have many choices and fun.
eGo One CT battery
Size (length x diameter): 108 x 19mm
Resistance range: 0.2ohm - 1.0ohm for CT mode
0.4ohm - 3.5ohm for CW mode
eGo One atomizer:
eGo One CT Starter Kit Comes with
1 x eGo One CT battery
1 x eGo One atomizer, 1.8ml (no head)
1 x eGo One CL-Ni Atomizer head (0.2ohm)
1 x eGo One CL-Ti Atomizer head (0.4ohm)
1 X eGo One CL head (1.0ohm)
1 x USB cable
1 x AC adapter
1 x User manual
CT-Ni, CT-Ti/CW Mode Applied
Tiny Shape with Easy Operation
Varied Levels of Watts and Temps
Many Color Options
How to use:
Power on and off: press the button for 5 times in quick succession, the button light will flash 5 times to indicate eGo ONE CT is ready for use. In the same way, eGo ONE CT will be powered off after 5 presses.
Vaping: press the button and inhale or vape. When the button is held down, the button light will be on.
Charging: simply charge eGO ONE CT by connecting it with a computer or a wall adapter via USB cable. When it's fully charged, the button light will go out.
Shift Between CT-Ni/CT-TI/CW Modes: when the device is off, long press the fire button, you can shift between CT-Ni/CT-Ti/CW modes within 2 seconds. And release the fire button to preserve the current mode.
Note: only use temp control coils under CT mode. Damages will be caused when temp control coils are accidentally used under CW mode.
Adjustment of levels: when it's powered on, press the fire button three times to shift among Low/Medium/High levels of Wattage (under CW mode)/temperature (or CT mode) to your preference.
Output Levels for eGo One CT (CW mode)
0.4-0.8ohm 0.81-1.6ohm 1.61-3.5ohm
25W 15W 7.5W
Temp Levels for eGo One CT (CT Mode)
Battery display function: the light will flash slowly or stay lit when battery level is high, on the contrary, the light flashes in frequency.
Battery quantity Light condition
60% - 100% Stay lit
30% - 59% Slowly flashes
10% - 29% Moderately flashes
0 - 9% Flashes in frequency
The battery light flashes red when charging or connecting with USB, and goes out in 5 seconds when it is fully charged.
Soak the atomizer head: when using a new atomizer head, please drip a few drops of e-juice in the cotton of atomizer head to reach the best performance.
E-juice filling: separate the atomizer from the battery and inject the liquid directly into the cambered slot.