> Mechanical Mod > Ehpro
Sort By:
Page of 1
Ehpro S-Key SS 18650/18500/18350 Mod

The S-Key Mod Clone by Ehpro is an unique mechanical mod consists of a solid SS body.
It includes three stainless steel tube allowing you to use 18350, 18500 and 18650 sized batteries.

Features:
1. Innovative button and lock system;
2. Floating magnetic locking ring with 360 degree action and image indicator
3. Spring-loaded bottom-firing switch;
4. Silver-plated copper contacts;
5. Extra tubes for 18500 & 18650 batteries;
6. Solid stainless steel body with brass components.

Our Price: $9.95
Ehpro SMPL Copper 18650 Mod (Clone) Ehpro SMPL Copper 18650 Mod (Clone)

The Ehpro SMPL mod (clone) is a 22mm mechanical mod that hits hard with it's stainless steel tube.
It will perfectly match with atomizer whose diameter is about 22mm,
Features:
1. Stainless body;
2. No circuit board (True mechanical mod);
3. Brass button firing pin;
4. No thread contact pin;
6. Six vents on the bottom button to cool the battery down.

Each set contains:
1pc Ehpro SMPL Copper 18650 Mod (Clone)
1pc Pounch (Grey)

Size: Height 78mm;Diameter 22mm

Our Price: $9.95
Ehpro Origin Brass18650 Mod - High End Clone Ehpro Origin Brass18650 Mod - High End Clone


Ehpro Origin Brass 18650 Clone manufactured out of Stainless Steel and Brass.

18650 Mod
Brass mod/Stainless Highlight Rings
510 Connector
Adjustable Airflow
Diameter 21mm
Length 110mm,80mm,65mm
Lock Ring
Spring Fired
Adjustable button throw
3 tube Design can use 18650(+kick), 18550 or 18350

Each Set Contains:

1pc Ehpro Brass Origin Mod
1pc Bag
1pc Gift Box

We recommend our Efest IMR batteries for unparalleled performance and increased safety.

Our Price: $10.00
LE PETIT GROS STYLED MOD BY EHPRO 18350 LE PETIT GROS STYLED MOD BY EHPRO 18350

Le Petit Gros Styled Mod by Ehpro
At 56mm tall, this will be one of the smallest mods you have seen to date! The generic Le Petit Gros's unique design utilizes a recessed hybrid style connection that give it that mini size. When attaching your 22mm atomizer it tucks a portion of your atomizer into the Petit's body to minimize the overall length of the mod
Features:
Solid brass hybrid-style 510 connector
Recessed atomizer mounting (fits atomizers with a diameter of 22mm or under)
Uses 18350 sized batteries
Recessed bottom spring-loaded firing switch, without lock
Diameter: 23.9 mm
4 air holes on the tube
General Tips
Always insert the positive side of the battery into the tube FIRST! So if your mod was sitting on a table, the positive side of the battery would be facing up and the negative side of the battery should be facing down towards the button (Failing to properly insert your battery can kill your mod)
Always use protected batteries from reputable brands such as eFest. Failure to use these batteries can result in explosion and/ or severe incorrect fitment. If your mod is not firing and you ARE NOT using correct batteries.
Always use a mod safety fuse when running unprotected batteries which should be purchased on our site
Never stack batteries
Prior to using your mod, we suggest cleaning the contact pin, firing pin, tube threads, as well as the inside of all of the tubes. To clean simply remove the contact pin from the mod and thoroughly clean the contact pin, firing pin, threads, and inside of the mod tubes with a microfiber towel and standard rubbing alcohol to remove the manufacturing oil which will decrease the conductivity (aka decrease the resistance/drop voltage)
Warning To Consumer:
1-Experienced Users Only! Wide Open Mods like this cannot safely be used by inexperienced users or users who do not have basic knowledge of electronics.
2-This is an unprotected device and can explode or catch fire if not used properly or used with unprotected batteries.
3-We are NOT responsible for any damage caused by the misuse of the battery.
4-By purchasing this product you certify that you meet the requirements above.

Our Price: $10.00
Ehpro Nemesis Mod - High End Clone Ehpro Nemesis Mod Stainless or Black - High End Clone

Ehpro Nemesis Clone manufactured out of Stainless Steel

Black Version shown in 18350&18500 mode.

18650 Mod
Stainless or Black
510 Connector
Designed to house a protected 18650 3.7V battery
Diameter 23mm
Length 97mm
Lock Ring
Spring Fired
The Nemesis also comes with an additional small ring which allows you to stack 18350 batteries. Although it's possible, WE Don't recommend stacking batteries in a mechanical device.
Please remove this ring to allow for single-battery setups.

Each Set Contains:

1pc Ehpro Stainless or Black 18650 Mod
1pc Bag
1pc Gift Box
1pc Bag

We recommend our Efest IMR batteries for unparalleled performance and increased safety.

Our Price: $15.95
Ehpro Maraxus telescopic Mod Black  - High End Clone Ehpro Maraxus Telescopic Mod Black - High End Clone


Ehpro Maraxus 18650 Clone manufactured out of Stainless Steel.

18650 - 18350 Telescopic Mod
Stainless Highlight Rings
510 Connector

Diameter 21mm
Length 102mm,91mm,25mm
Lock Ring
Spring Fired
Telescopic To fit 1835,18500 or 18650

Each Set Contains:

1pc Ehpro Maraxus Mod
1pc Bag
1pc Gift Box

Unit Shown in telescopic states.

We recommend our Efest IMR batteries for unparalleled performance and increased safety.

Our Price: $15.95
Ehpro Valkyrie Hybrid Clone Mod W/Rebuildable Atomizer Ehpro Valkyrie Hybrid Clone Mod W/Rebuildable Atomizer

Ehpro Valkyrie Hybrid Clone Mod W/Rebuildable Atomizer

Adjustable airflow system, the top cap features adjustable airflow for single and dual coil builds, user can adjust to his preference.
Adjustable pin, there is an adjustable pin where the negative end of the battery rests on the switch, so any 18650 can be made to fit.
Three ports in The atomizer portion features 3 posts, making it easy to build single or dual coils.
Fixed atomizer, the atomizer is permanently attached to the rest of the mod, so no 510 or ego threading, and the battery touches the positive contact directly, virtually eliminating voltage drop.

Height: 114mm
Width: 20-25mm depending on area of machine curve

1x Ehpro Valkyrie Clone Hybrid Mod W/Rebuldable Atomizer
1x Silica Wick
1x Kanthal Wire
1x Pouch
5x O-ring

Our Price: $19.95
Ehpro Caravela 18650 Mod - High End Clone Ehpro Caravela 18650 Mod - High End Clone


Ehpro Caravela Clone manufactured out of Stainless Steel and Copper.

18650 Mod
Stainless or Black
510 Connector
Designed to house a protected 18650 3.7V battery
Has 3 Interchangeable positive pins
Diameter 23mm
Length 97mm
Lock Ring
Spring Fired
Copper components provides enhanced conductivity

Each Set Contains:

1pc Ehpro Stainless or Black 18650 Mod
1pc Spare Spring
3pc Interchangeable Positive Pins
1pc Bag
1pc Gift Box

We recommend our Efest IMR batteries for unparalleled performance and increased safety.

Our Price: $19.95
Ehpro Panzer Mod - High End Clone Ehpro Panzer Mod Stainless or Black - High End Clone

Ehpro Panzer

18350,18500,18650 Mod
Stainless or Black
510 Connector
Has Floating positive pin
Lock Ring
Spring Fired
Copper components provides enhanced conductivity

Each Set Contains:

1pc Ehpro Stainless or Black 18650 Mod Changeable
1pc Gift Box

I unit Black or Stainless
Picture shows both and Stainless torn down.

We recommend our Efest IMR batteries for unparalleled performance and increased safety.

Our Price: $19.95
Ehpro Buffalo 18650 Mod - High End Clone Ehpro Buffalo 18650 Mod - High End Clone

Ehpro Buffalo 18650 Clone manufactured out of Stainless Steel and Brass.

18650 Mod
Brass mod/Stainless Highlight Rings
510 Connector
Diameter 21mm
Length 110mm,80mm,65mm
Lock Ring
Spring Fired
Adjustable button throw
3 tube Design can use 18650, 18500 or 18350

Each Set Contains:

1pc Ehpro Buffalo Mod
1pc Bag
1pc Gift Box
1pc spare o-rings

Shown in all three modes.

We recommend our Efest IMR batteries for unparalleled performance and increased safety.

Our Price: $19.95
Ehpro Manhattan Brass Clone Mod Ehpro Manhattan Brass Clone Mod

Ehpro Manhattan Brass Clone Mod

The Manhattan clone is made from solid brass and accepts 18650 battery types.
The Manhattan features an innovative magentic button which helps ensure that your mod will not autofire when set down.
It also features a floating copper atomizer contact pin which adjusts automatically to your specific atomizer, making it easy for users of all levels.
Size: Height 98mm; Diameter 25mm

Each Set Contains:
1 x Manhattan body
2 x Copper Pins
1x Gift Box
1x Gift Bag

Our Price: $19.95
Ehpro Fuhattan Copper 26650 Mod (Clone) Ehpro Fuhattan Copper 26650 Mod (Clone)

The Fuhattan Copper 26650 mod is a massive 26650 mechanical mod.
Features:
1. Copper body
2. Copper pin, it brings good conductivity
3. Magnetic switch
4. Suit IMR 26650 battery Efest

Each set contains:
1pc Ehpro Fuhattan Copper 26650 Mod
1pc Pouch
1pc Gift box

Size: Length 99mm;Diameter 31mm

Our Price: $19.95
Ehpro Black Valkyrie Hybrid Clone Mod W/Rebuildable Atomizer Ehpro Black Valkyrie Hybrid Clone Mod W/Rebuildable Atomizer

Same as Stainless only in black.
Ehpro Valkyrie Hybrid Clone Mod W/Rebuildable Atomizer Adjustable airflow system, the top cap features adjustable airflow for single and dual coil builds, user can adjust to his preference. Adjustable pin, there is an adjustable pin where the negative end of the battery rests on the switch, so any 18650 can be made to fit. Three ports in The atomizer portion features 3 posts, making it easy to build single or dual coils. Fixed atomizer, the atomizer is permanently attached to the rest of the mod, so no 510 or ego threading, and the battery touches the positive contact directly, virtually eliminating voltage drop. Height: 114mm Width: 20-25mm depending on area of machine curve 1x Ehpro Valkyrie Clone Hybrid Mod W/Rebuldable Atomizer 1x Silica Wick 1x Kanthal Wire 1x Pouch 5x O-ring

Our Price: $24.95