> Rebuildable Atomizers & DIY Accessories/Materials/Tools > Rebuildable & High End RDA Clones > Ehpro
Sort By:
Page of 1
Ehpro Stillare V3 Stainless Steel Rebuildable Dripping Atomizer Ehpro Stillare V3 Stainless Steel Rebuildable Dripping Atomizer

The latest version of Stillare RDA cloned by Ehpro with some new features.

Features:
1. Four-post design, support many kinds of coil setups
2. There are 6 pre-drilled holes on the positive post
3. Adjustable airflow control system
4. Stainless steel body
5. Copper contact pin
6. 510 threading
Each set contains:
1pc Ehpro Stillare V3 Stainless Steel Rebuildable Dripping Atomizer (Clone)
1pc Fiber wick
1pc Resistance wire
2pcs Spare post screw
3pcs Spare o-ring (in various size)

Size: Length 45mm;Diameter 22mm

Spec:
Post Quantity: 4
Airflow Control: Airflow Control Ring
Depth of Deck: Medium (2-3mm)
Contact Pin Material: Copper
Top Cap Design: Vault Cap
Note:
Rebuildable atomizers are intended for advanced users, who have knowledge of how to use it safely

Our Price: $4.95
Ehpro Omega Rebuildable Atomizer Ehpro Omega Rebuildable Atomizer

Ehpro Omega Rebuildable Atomizer

Stainless Steel
Adjustable Airflow 3 post
Unique oversized drip well
510/eGo Threaded
Height: 80mm
Width: 22mm

1pc EHPro Omega RDA
1pc Short Stainless Steel Drip Tip
1pc Large Stainless Steel Drip Tip
1pc 6 inches of 2mm Braided Silica, Hollow
1pc 6 inches of 32-Gauge Kanthal Wire
3pc Replacement O-Rings (1 Large ones,2 small ones)
1pc Blue Mini Screw Driver

Our Price: $5.00
Ehpro Helios Rebuildable Atomizer Ehpro Helios Rebuildable Atomizer

Ehpro Helios Rebuildable Atomizer

Stainless Steel
Adjustable Airflow
4 post(mid shared 2)
Height: 47mm
Width: 20mm
Atomizer as shown with drip tip. Unit does NOT come precoiled.

Our Price: $5.00
Ehpro Flash V2 Rebuildable Atomizer Ehpro Flash V2 Rebuildable Atomizer

Ehpro Flash V2 Rebuildable Atomizer
Blackl, Adjustable airflow

Height: 84mm
Width: 23mm
510/eGo


1 pc Flash Base
1 pc Dripper Cap
1 pc 3-Piece Tank Cap
1 pc (Optional) Clear Polycarbonate Window
1 pc Short Stainless Steel Drip Tip
Approx. 5 Inches of 30-gauge Kanthal
Approx. 3 Inches of 2.5mm Braided Silica Hollow
Approx. 1.5cm x 1.5cm of Stainless Steel Mesh
2 pcs Replacement Airflow Screws
2 pcs Replacement Ground and Positive Screws & Replacement O-Rings

Our Price: $5.00
Ehpro Quasar Clone Rebuildable Dripping Atomizer Ehpro Quasar Clone Rebuildable Dripping Atomizer

Ehpro Quasar Clone Rebuildable Dripping Atomizer

Features:

1. 1:1 Clone;
2. Stainless steel body;
3. Three post design;
4. Airflow control top cap;
5. Engraved top cap, base and deck;
6. Domed top cap for more liquid.

Material: Stainless steel
Color: Stainless
Size: Length: 49mm; Diameter: 22mm
Threading: 510

Our Price: $5.00
Ehpro Zenith V2 Clone Rebuildable Dripping Atomizer Ehpro Zenith V2 Clone Rebuildable Dripping Atomizer

The Zenith V2 is an uniquely designed RDA clone with 3 posts that are slotted for thicker gauge wires or dual parallel builds.

Features:
1. EHPro Clone
2. Airflow control;
3. 3 posts design;
4. Stainless steel body;
5. Hig temperature insulator on center post;
6. Slit post holes for easy build;

Note: Please unscrew the top cap to adjust the airflow.

Brand: Ehpro
Unit: 1 set
Material: Stainless steel
Color: Stainless
Size: Length 49mm; Diameter: 22mm
Threading: 510
Shipping weight: 75g
Package: Paper box

Each set contains:
1pc Zenith V2 clone RDA
1pc Stainless steel 510 drip tip
1pc Mini Spanner
1pc Silica wick
1pc Kanthal wire
3pcs Extra o-ring (1 small, 2 big)

Our Price: $5.00
Ehpro Derringer Rebuildable Dripping Atomizer (Clone) Ehpro Derringer Rebuildable Dripping Atomizer (Clone)

The Derringer RDA cloned by Ehpro is one of the smallest rebuildable atomizers on the market, only 22mm in height & 21.8mm in diameter.

Features:
1. 3-post design with a gold plated positive post
2. Pre-drilled post holes for easy coil building
3. Adjustable airflow control, with variety ways of air intake
4. Deep juice well
5. Adjustable copper contact pin
6. PEEK insulator
7. Small in size
8. 510 threading

Parameters:
Post Quantity: 3
Airflow Control: Airflow Control Ring
Depth of Deck: Deep
Contact Pin Material: Copper
Top Cap Design: Flat Cap

Each set contains:
1pc Ehpro Derringer Copper Rebuildable Dripping Atomizer (Clone)
1pc Mini spanner
2pcs Spare post screw
2pcs Spare o-ring (one big, one small)
Note:
Rebuildable atomizers are intended for advanced users, who have knowledge of how to use it safely.

Our Price: $5.00
Ehpro Trident V2 Rebuildable Atomizer Ehpro Trident V2 Rebuildable Atomizer

Ehpro Trident V2 Rebuildable Atomizer

Stainless Steel
5 Piece 6 holes on upper adjust ring for desired vape
3 Post
Copper positive Connection

Height: 46mm
Width: 21mm
510/eGo Threaded

Includes Atomizer as shown with drip tip.
Does not include coil.

Our Price: $10.00
Ehpro Tobh V2.5 Clone RDA Ehpro Tobh V2.5 Clone RDA

Ehpro Tobh V2.5 And V2.0 (Black) Clone Rebuildable Atomizer 3 piece RDA, Adjustable airflow, 3 post deep weel and unique "heatsink" design.


This is upgraded Tobh rebuildable dripping atomizer,the Tobh 2.5 features increased airflow, better terminal screws, and improved heat dissipation.
It has 3 posts for easy dual-coil builds and adjustable airflow.
The biggest feature is the top comes off for easy dripping. You no longer have to choose between removing the entire top cap or drip tip, or dripping through a standard-size drip tip. You can now choose to only remove the top half of the atomizer for easy, leak-free dripping with no juice backup.
This section of the top cap also acts as a heat sink, which disperses the heat coming from the coil, and keeps your drip tip cool to the touch.
In addition, the unique design of the Tobh features a deep drip well that won't get in your way when trying to install coils, and acts as a reservoir for your liquid. In short, it can hold a lot of liquid without leaking!
Size: Height 50mm; Diameter 22mm

Includes SS wide bore drip tip as shown.

Each set contains:
·1*Tobh atomizer clone
·1*Drip Tip
·1*Wick(3mm)
·1*Wire(28gauge)
·4*Extra O-Rings(various sizes)

The Black ones are Version 2.0 not 2.5

Our Price: $10.00
Ehpro 454 Big Block RDA Clone

The Ehpro 454 Big Block RDA Clone is popular for its versatility and range of coil setups. This RDA is compatible with single, double, triple and quad coil builds. Plus, The 454's negative connection is the entire outer ring of the RDA, allowing a user to be creative when rebuilding. For a comfortable vaping experience, the drip tip is covered in delrin and the body can be adjusted for customized airflow.

Features:

  • Single, double, triple and quad coil compatible
  • Adjustable airflow
  • Delrin covered drip tip
  • Single center postive post
  • Negative connection is the entire outer ring of the RDA
  • Conical top

Our Price: $10.00
Ehpro Authentic Billow RTA Rebuildable Atomizer Ehpro Authentic Billow RTA Rebuildable Atomizer

The Billow RTA designed by Ehpro & Eciggity has almost all Orchid features and also a bunch more changes and upgrades.

Features:
1. Stainless steel body & Pyrex glass tank
2. Two large 2.5mm airflow holes on the base, which can be adjusted separately with the adjustable airflow pin located on the bottom of the atomizer
3. On the deck, there are 2 large raised cyclops airflow holes to distribute the airflow
4. Four-post design, with pre-drilled holes on posts
5. Four deep oil channels
6. Tank capacity: 5.0ml
7. Bottom oil filling
8. Adjustable copper contact pin
9. 510 threading

Each set contains:
1pc Ehpro Billow RTA
1pc Mini Stainless Steel Multifunction Screwdriver with Keychain
1pc Fiber wick
1pc Resistance wire
3pcs Spare o-ring (in various size)

Size: Height 78mm;Diameter 22mm

Note:
Rebuildable atomizers are intended for advanced users, who have knowledge of how to use it safely.

Our Price: $10.00
Ehpro Little Boy Stainless Steel Rebuildable Dripping Atomizer (Clone) Ehpro Little Boy Stainless Steel Rebuildable Dripping Atomizer (Clone)

The Little Boy RDA (rebuildable drip atomizer), cloned by Ehpro, is a highly sophisticated 22mm stainless steel atomizer.

Features:
1. Adjustable Airflow Control
2. Food Grade Stainless Steel Construction
3. Delrin Wide Bore Drip Tip (black)
3. Delrin Adaptor for Standard 510 Drip Tip
5. Three Posts (ability to build single, dual and quad coil)
6. 2mm Post Holes

Each Set Contains:
1pc Ehpro Little Boy Stainless Steel Rebuildable Dripping Atomizer (Clone)
1pc Wide Bore Delrin Drip Tip (Black)
1pc Resistance Wire
1pc Fiber Wick
6pc Spare O-ring (2 big, 3 middle, 1 small)
2pc Spare Screw
Size: Height 52mm/50mm; Diameter 22mm;

NOTE:
There is no original logo on this RDA body.
Note:
Rebuildable atomizers are intended for advanced users, who have knowledge of how to use it safely.

Our Price: $10.00
Ehpro Tyr 26650 RDA

Exclusively designed by Ehpro, the Tyr rda (rebuildable drip attomizer) is made from SUS 303 stainles steel with a diameter of 29.7mm. Exceptionally stylish and the ideal atomizer for your existing 26650 sized mechanical mods. The unique 5 posts allows a wide range of coil set up configurations and massive vapor production. The top cap is equipped with air holes to adjust different draw capacity performance. Each Tyr RDA is attached with copper contact pins for superior conductivity. The underside of the top cap also has a large conical design that can alternatively decrease turbulent airflow or low pressure usage. Finally, the drip tip that is included, has a easy grip to remove from your top cap without difficulty.

Features:

  • Model name: Tyr rda 26650
  • Length: 65mm (with drip tip)
  • Diameter: Overall 29.7mm, Base Diameter w/o Cap: 28.5mm
  • Material: SUS 303
  • 5 Post Design
  • Deep center well for additional liquid capacity
  • Phillips screws on posts
  • Air flow control
  • Conical / Dome style chamber top cap
  • Threading: 510 threading
  • Contact pin: copper
  • Weight: 85g (without packing box)

Our Price: $12.95
Ehpro Samurai Stainless Steel Rebuildable Dripping Atomizer (Clone) Ehpro Samurai Stainless Steel Rebuildable Dripping Atomizer (Clone)

The Samurai RDA cloned by Ehpro is an all around device for cloud chasing, regular vaping, and taste chasing.

Features:
1. Stainless steel construction
2. Bi-directional airflow both from the bottom of the coils through the side of the deck
3. Also with the standard airflow slots in front of the coils
4. Three-post design, with pre-drilled coil holes
5. Finned top cap with a long delrin drip tip
6. Comes with an extra delrin "chuff style" drip cap
7. Adjustable copper contact pin for excellent conductivity
8. 510 threading

Parameters:
Post Quantity: 3
Airflow Control: Airflow Control Ring
Depth of Deck: Deep
Contact Pin Material: Copper
Top Cap Design: Finned Cap

Each set contains:
1pc Ehpro Samurai Stainless Steel Rebuildable Dripping Atomizer (Clone)
1pc Spare delrin "chuff style" drip cap
1pc Mini screwdriver
2pcs Spare post screw
2pc Spare o-ring
Note:
Rebuildable atomizers are intended for advanced users, who have knowledge of how to use it safely.

Our Price: $12.95
Ehpro Atomic Rebuildable Atomizer Ehpro Atomic Rebuildable Atomizer

Ehpro Atomic Rebuildable Atomizer 3 piece RDA, Adjustable airflow, 3 post.

Stainless Steel
Height: 50mm
Width: 19mm
510/eGo

Includes SS wide bore drip tip.

1pc Atomic Clone Rebuldable Atomizer
1pc Silica Wick
1pc Kanthal Wire
2pc Spare screws & O-rings

Our Price: $14.95
Ehpro Stillare V2 22mm Clone Ehpro Stillare V2 22mm Clone Stainless or Black

Ehpro Stillare V2 RDA Clone
Specs:
Resistance: Your build
Material: Stainless
Threading: 510, can be used on all ego devices with a suggested beauty ring or eGo sleeve.
Air hole: Adjustable silted
Diameter: 20mm
Length: 50mm
Includes:
1- Fully assembled EHPro Stillare V2
1- Stainless drip tip as shown in picture
1- mini screwdriver
1- set of wick, wire, screws and 0-ring
1pc Screw Driver

Comes in Stainless Steel or Black

Our Price: $14.95
Ehpro Pontus Dripper Tank

The Newest Pontus RDA V1.5 Is HERE! Pontus V1.5 Has An Upgraded Juice Delivery Control With Added Additional 2 Juice Holes to Saturate Your Wick More Efficiently! Huge Improvement!

Proudly introduce another Original & Affordable RDA from EHpro. This innovative RDA eliminate the task of having to frequently drip by using an internal reservoir to feed the base of the RDA with a simple press of the drip tip.

The Pontus Dripping Tank Styled RDA is an innovative design developed and manufactured by EHpro. It's their second #NotaClone RDA. This RDA allows user to drip by pressing down the drip tip from its 3.8 ml capacity tank. This method allows E-Juice to travel from the main reservoir to the base of the RDA. The base of the RDA is a traditional 3 posts RDA that you can perform many different builds on. The adjustable airflow control allows user to find the perfect airflow for that desired preference.

Product Features:

  • Another Original & Affordable RDA From EHPro
  • 22mm in Diameter so it fits most 22mm Mod Flush!
  • Stainless Steel and Pyrex Glass Construction
  • Adjustable Airflow Control
  • Dual Coil Capability
  • Top spring loaded juice flow control
  • Pontus V1.5 Comes with additional 2 Juice Holes for more efficient dripping and more saturated wick!
  • Press the drip tip is all your need to drip
  • 510 Connection
  • Traditional 3 post design to perform your favorite builds
  • 3.8ml E-Juice Capacity

Our Price: $14.95
Ehpro Original Evil Eye 26650 Rebuildable Tank Atomizer Ehpro Original Evil Eye 26650 Rebuildable Tank Atomizer

The Evil Eye RTA is the latest original design from Ehpro.
It is a 26650 styled RTA with a diameter of 30mm. And the deck is wide enough for you to build many coil setups.

Features:
1. Made of 304 stainless steel & pyrex glass
2. 26650 styled with a diameter of 30mm
3. Four-post design, which allows many coil setups
4. Bottom filling, the maximum ejuice capacity is 8.0ml
5. Adjustable copper pin
6. PEEK insulator
7. There are 4 feeding channels & 2 * 2mm airholes on the side
8. 510 threading

Each set contains:
1pc Ehpro Original Evil Eye 26650 Rebuildable Tank Atomizer
1pc Spare pyrex glass tube
1pc Mini stainless steel multifunction screwdriver with keychain
5pcs Spare o-ring (in various size)
2pcs Spare post screws

Size: Height 74.2mm; Diameter 30mm
Note:
Rebuildable atomizers are intended for advanced users, who have knowledge of how to use it safely.

Our Price: $14.95
Ehpro Big Buddha Kayfun Style 26650 Rebuildable Atomizer Ehpro Big Buddha Kayfun Style 26650 Rebuildable Atomizer Stainless Steel or Black

Ehpro Big Buddha Kayfun Style 26650 Rebuildable Atomizer

The Big Buddha Kayfun style 26650 RBA is originally made by Ehpro, and it is custom designed for the Ehpro Dynast 26650 Mod, they are perfectly matched.

Features:

1. Stainless steel body with one glass tube;
2. 4 posts design, allows dual or quad coil configurations
3. 2 big adjustable air holes
4. Quartz glass tube,stand high temperature and is hardly deformed
5. Double o-ring design on top and bottom cap
6. Maximum capacity: 10ml
7. Top chimney screw design to top cap for added secureness
8. 510 stainless steel drip tip

Includes:

1pc EHPro Big Buddha Kayfun Style 26650 RBA
1pc Drip Tip
1pc Kanthal Wire
1pc Silica Wick
1pc Gift Box
6pcs O-Ring (2 small, 4 big)
1pc Mini Stainless Steel Multifunction Screwdriver with Keychain
1pc Spare stainless steel tube
Comes In Stainless Steel or Black

Our Price: $19.95
Ehpro RDTA Revel Rebuildable Tank Kit Ehpro RDTA Revel Rebuildable Tank Kit

Ehpro RDTA Revel Rebuildable Tank Kit - Steel or Black, a new concept RDTA tank, made of stainless steel and quartz glass. It consists of a press-button for oil filling, a notatable base for building the coil easily, and a 2 in 1 dripper& tank. The glass tanks will keep e-fluid for rda, just like a bottle of e-fluid, 2.5ml capacity. Very convenient for you carry for work or driving.
Features
1. Capacity: 2.5ml
2. Combination with rda & rba
3. EHPRO original design
4. Revel rdta hybrid atomizer
5. 22 mm diameter
6. 304 stainless
7. Adjustable airflow vents
Parameters
Length: 79mm (including tip, not including thread)
Diameter: 22mm
Material: Stainless Steel & Pyrex glass
Colour: Silver
Connector: Adjustable Copper Connector
It comes with:
1 x Ehpro RDTA Revel Tank - Steel
wick and 2ocs wire
1 x screwdriver
Several o-rings and 1 screw

E-juice filling
You need to twist the radiator anticlockwise. Fill the oil to the tank via the little hole with a syringe.
Note:
It comes without coil built.
Rebuildables are for experts, not average or beginner vapers with no knowledge of how to rebiuld atomizers.These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.
510 thread. Compatible with 510/ego thread batteries.

Our Price: $19.95
Ehpro Billow V2 RTA Tank Atomizer - 5ml, Black Ehpro Billow V2 RTA Tank Atomizer - 5ml,

Ehpro Billow V2 RTA Tank Atomizer - 5ml, it comes with two-piece chimney, cotton grooves design on deck, AFC ring with bigger airflow hole. It features oil reserve tank, and free style oil dripping.
Features
1. Two-piece chimney
2. Rebuild coils without dumping out your juice
3. Cotton grooves design on deck
4. Heat resist ting glass tube
5. AFC ring with bigger airflow hole
6. Peek insulator
7. Wide bore delrin base drip tip
Parameters
Size (diameter *height): 23 * 68.8mm ( with 510 thread)
Capacity: 5ml
Material: 304 SS, Pyrex glass, POM
Color: silver
Ehpro Billow V2 comes with
1 x Ehpro Billow V2 tank
1 x accessory bag of 0-rings and screws
1 x screwdriver
1 x user manual
spare cotton and coils

How to fill oil
Take the bottom hardware and the chimney part apart; tilt the chimney part and heep the filling hole upwards. Then start to fill the oil; screw the chimney part onto the bottom hardware after filling. Make sure they are tightly connected.
Notice: the filling hole must be upward when filling, to avoid overflow; do not fill liquid into the chimney.
Note:
It comes without coil built.
Rebuildables are for experts, not average or beginner vapers with no knowledge of how to rebuild atomizers.These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.
510 thread. Compatible with 510/ego thread batteries.

Our Price: $19.95
Ehpro Epoch D1 RTA Tank Kit - 2.5ml Ehpro Epoch D1 RTA Tank Kit - 2.5ml

Ehpro Epoch D1 RTA Tank Kit - 2.5ml, is a brand-new RTA with high capacity and dual coil which help you fully start your vaping journey!
Features
1. 2.5ml capacity
2. Unique Top-filling design
3. Huge Cloud, great flavor
Parameters
Size (length x diameter): 72mm x 21.5mm
Capacity: 2.5ml
Thread: 510 thread
Material: 304ss
Ehpro Epoch D1 RTA Tank Kit - 2.5ml comes with
1x Epoch D1 RTA by Ehpro - 2.5ml
1x Drip Cap
1x Screw Driver
1x User Manual

How to install
1. Install the coil on the base, the coil should be right above 2 air holes.
2. Build cotton, both ends of cotton should cover the base evenly, especially on the 4 oil intake holes. Then drip e-liquid on cotton, until e-juice fully absorbed.
3. Screw the chimney onto the bottom hardware. Make sure they are tightly connected.
4. Screw the connection part onto the bottom hardware. Make sure they are tightly connected.
5. Check to make sure the raised part of the chimney is over against the recessed part of the drip cap, then insert the drip cap into the upper hardware.
Oil filling
1. Turn off the chimney: screw the drip cap clockwise until it is fully closed.
2. Pull out the drip cap, fill the e-juice from the edge of top hardware
3. Insert the drip cap into the upper hardware when fully filled

Airflow adjustment
Please screw adjustable screw to the wanted air hole position before use of the atomizer
If you need adjust the airflow, please screw out the adjustable screw until it's the same level of bottom surface of the base.
Note:
It comes without coil built.
Rebuildables are for experts, not average or beginner vapers with no knowledge of how to rebuild atomizers.These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.

Our Price: $23.95
Ehpro Aqua Rebuildable Atomizer Ehpro Aqua Rebuildable Atomizer

Ehpro Aqua Rebuildable Atomizer

Adjustable airflow system, brass contacts Stainless Steel.

Height: 73mm
Width: 21mm
510/eGo

1pc Stainless steel drip tip

1pc brass pin3pc Large O-Rings

3pc Small O-Rings

3pc Mini O-Rings

1pc Black Gift box

Our Price: $24.95
Ehpro Valkyrie Hybrid Clone Mod W/Rebuildable Atomizer Ehpro Valkyrie Hybrid Clone Mod W/Rebuildable Atomizer

Ehpro Valkyrie Hybrid Clone Mod W/Rebuildable Atomizer

Adjustable airflow system, the top cap features adjustable airflow for single and dual coil builds, user can adjust to his preference.
Adjustable pin, there is an adjustable pin where the negative end of the battery rests on the switch, so any 18650 can be made to fit.
Three ports in The atomizer portion features 3 posts, making it easy to build single or dual coils.
Fixed atomizer, the atomizer is permanently attached to the rest of the mod, so no 510 or ego threading, and the battery touches the positive contact directly, virtually eliminating voltage drop.

Height: 114mm
Width: 20-25mm depending on area of machine curve

1x Ehpro Valkyrie Clone Hybrid Mod W/Rebuldable Atomizer
1x Silica Wick
1x Kanthal Wire
1x Pouch
5x O-ring

Our Price: $24.95
Ehpro Black Valkyrie Hybrid Clone Mod W/Rebuildable Atomizer Ehpro Black Valkyrie Hybrid Clone Mod W/Rebuildable Atomizer

Same as Stainless only in black.
Ehpro Valkyrie Hybrid Clone Mod W/Rebuildable Atomizer Adjustable airflow system, the top cap features adjustable airflow for single and dual coil builds, user can adjust to his preference. Adjustable pin, there is an adjustable pin where the negative end of the battery rests on the switch, so any 18650 can be made to fit. Three ports in The atomizer portion features 3 posts, making it easy to build single or dual coils. Fixed atomizer, the atomizer is permanently attached to the rest of the mod, so no 510 or ego threading, and the battery touches the positive contact directly, virtually eliminating voltage drop. Height: 114mm Width: 20-25mm depending on area of machine curve 1x Ehpro Valkyrie Clone Hybrid Mod W/Rebuldable Atomizer 1x Silica Wick 1x Kanthal Wire 1x Pouch 5x O-ring

Our Price: $34.95